Automation - Pyronix HOMECONTROLHUB User Manual

AUTOMATION

An automation is a preprogrammed series of events that will operate without the need to be triggered by the end user.
The below is an example of an automation sequence where the fan switches on and after a delay, the lamp follows on.
STEP 1 STEP 2
Tap the Smart Home tab on the left side Select 'Create new automation'.
of the main screen.
STEP 7 - (fan) STEP 8
Select 'Run the device'. Tap 'Select device' and choose the
smart device that is to switch at the
programmed time.
STEP 13 - (lamp) STEP 14
Select 'Run the device'. Tap 'Select device' and choose the smart
device that is to switch after the delay.
20
HOMECONTROLHUB USER GUIDE
STEP 3
Enter a name for the automation and
pick the colour it will appear in on the
smart home screen.
- (fan) STEP 9 - (fan)
Select 'function' , 'switch' , then whether the
smart device is to switch on or off at the
programmed time.
- (lamp) STEP 15 - (lamp)
Select 'function' , 'switch' , then whether the
smart device is to switch on or off after
the delay.
STEP 4 - (schedule) STEP 5 - (schedule)
Select 'Schedule' and choose the days Select 'Start time' then drag the circle to
that the automation is to run on. the hour that the automation is to start at.
STEP 10 - (delay) STEP 11 - (delay)
Select 'Add another task' and then 'Add Select the amount of hours that the delay
Delay'. is to last.
STEP 16 STEP 17
Tap 'Finish' to save the automation. The created automation will now appear
in the 'Automation' column.
HOMECONTROLHUB USER GUIDE
STEP 6 - (schedule)
Repeat with the minutes past the hour
then tap 'OK'.
STEP 12 - (delay)
Do the same for the minutes and
seconds.
TOGGLE ON/OFF
The automation can be toggled on and
off using the slider next to the automation
name.
21