Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kramer RK-1
Summary of Contents for Kramer RK-1
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Rack Adapter Model: RK-1... -
Page 2: Table Of Contents
Figure 1: RK-1 Rack Adapter Figure 2: RK-1 Rack Adapter – Underside Figure 3: Mounting a half-19" unit via Screws on the RK-1 Side Panel Figure 4: Mounting a 6.5” Machine via Screws on the RK-1 Side Panel Figure 5: RK-1 Rack Adapter – Connecting a Blank Panel... -
Page 3: Introduction
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces; GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 One half-19" blank panel (P/N: 2636-000979) 3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com... -
Page 4: Overview
Overview You can mount a combination of several Kramer products in a 19" 1U rack. These include half-19" 1U units, 1/4-19" 1U units and 1/8-19" 1U units. The examples in Table 1 illustrate how different products could be combined: Mounting Kramer Products You can also mount 6.5"-1U units, as defined in Table 2:... -
Page 5: Recommendations For Best Performance
The RK-1 does not have to be entirely full with mounted units. Use blank panels to fill the empty spaces (see Table 3). Table 3: RK-1 Blank Panels – Part Numbers Half-19" 1U 1/4-19" 1U 1/8-19" 1U Short 6.5" 1U Long 6.5"... -
Page 6: Your Kramer Rk-1 Rack Adapter
Your Kramer RK-1 Rack Adapter The example in Figure 1 illustrates the mounting of: One half-19" unit (for example, the Kramer VM-9T) One 1/4-19” 1U unit (for example, the Kramer MultiTOOLS® 104B) Two 1/8-19” 1U units (for example, two Kramer MultiTOOLS® PS-1DVI) VM-9T You can order additional blank panels to cover a 1/4-19”... -
Page 7: Mounting On The Kramer Rk-1 Rack Adapter
The RK-1 underside includes a set of screw holes that are suitable for any combination of units to be mounted. To mount the units on the RK-1, as illustrated in Figure 1, do the following: 1. Place the first unit on the rack (for example, the Kramer VM-9T). -
Page 8: Mounting Units That Do Not Have Underside Screw Holes
RK-1. 3. Insert the two M3x6 screws through the holes on the side panel of the RK-1 that fit the holes on the side panel of the unit (as illustrated in Figure 3 and Figure 4). -
Page 9: Connecting A Blank Panel To The
Mounting on the Kramer RK-1 Rack Adapter Figure 4: Mounting a 6.5” Machine via Screws on the RK-1 Side Panel 5.2 Connecting a Blank Panel to the RK-1 You can connect a blank panel example in Figure 5 illustrates: VM-9T Figure 5: RK-1 Rack Adapter –... -
Page 10: Technical Specifications
1 Specifications are subject to change without notice 2 P/N: 2636-000979 3 See Table 3 Technical Specifications of the RK-1 19-inch (W), 7-inch (D) 1U (H) 1.2 kg. (2.65 lbs.) approx. 20 M3x5 screws, 1 half-19" 1U blank panel Blank panels... - Page 11 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 12 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the RK-1 and is the answer not in the manual?
Questions and answers