Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kramer RK-1
Summary of Contents for Kramer RK-1
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Rack Adapter Model: RK-1... -
Page 2: Table Of Contents
Figure 2: RK-1 Rack Adapter – Underside Figure 3: Mounting a half-19" unit via Screws on the RK-1 Side Panel Figure 4: Mounting a 6.5” Machine via Screws on the RK-1 Side Panel 104B (FC-31xl) 8 Figure 5: RK-1 Rack Adapter – Connecting a Blank Panel... -
Page 3: Introduction
• Review the contents of this user manual Overview You can mount a combination of several Kramer products, of various widths, in a 19" 1U rack using the RK-1 rack adapter. These include: • 1/2-19" 1U units—for example, two VP-5xl units (see Table •... -
Page 4: Installation Combinations
VM-50V unit with a short blank panel and a long blank panel (see Table 3.1 RK-1 Installation combinations Table 1 shows examples of how you can use the RK-1 to mount different combinations of products: Table 1: Using the RK-1 Mounting Kramer Products on the RK-1 For example: •... -
Page 5: Using Blank Panels
Overview You can mount one or two Kramer 6.5”products in a 19" 1U rack using the RK-1 rack adapter (see in Table 2) and close-up the empty space(s) with blank panels (see in Table Table 2: Using the RK-1 for 6.5"-1U Units Mounting Kramer 6.5"-1U products on the RK-1... -
Page 6: Recommendations For Best Performance
Table 4 indicate how to install different products together with blanks: Table 4: Using the RK-1 with Blank Panels Mounting Kramer Products with Blank Panels on the RK-1 For example: • One PIP-4 unit • One 1/2 19” blank panel •... -
Page 7: Your Kramer Rk-1 Rack Adapter
• One 1/2-19" unit (for example, the Kramer PIP-4) • One 1/4-19” 1U unit (for example, the Kramer MultiTOOLS® FC-31xl) • Two 1/8-19” 1U units (for example, two Kramer MultiTOOLS® PS-1DVI) Figure 1: RK-1 Rack Adapter You can order additional blank panels to cover a 1/4-19”... -
Page 8: Mounting On The Kramer Rk-1 Rack Adapter
Mounting on the Kramer RK-1 Rack Adapter Mounting on the Kramer RK-1 Rack Adapter The RK-1 underside includes a set of screw holes that are suitable for any combination of units to be mounted. To mount the units on the RK-1, as illustrated in... -
Page 9: Mounting Units That Do Not Have Underside Screw Holes
VA-50P), adjacent to the inner side panel of the RK-1. 3. Insert the two M3x6 screws through the holes on the side panel of the RK-1 that fit the holes on the side panel of the unit (as illustrated in Figure 3 Figure 4. -
Page 10: Figure 4: Mounting A 6.5" Machine Via Screws On The Rk-1 Side Panel 104B (Fc-31Xl)
Mounting on the Kramer RK-1 Rack Adapter Figure 4: Mounting a 6.5” Machine via Screws on the RK-1 Side Panel 104B (FC-31xl) KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 11: Connecting A Blank Panel To The
Technical Specifications 5.2 Connecting a Blank Panel to the RK-1 to the RK-1 to cover any empty spaces, as the You can connect a blank panel example in Figure 5 illustrates: Figure 5: RK-1 Rack Adapter – Connecting a Blank Panel... - Page 12 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 13 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the RK-1 and is the answer not in the manual?
Questions and answers