Related Manuals for Kramer RK-PS1
Summary of Contents for Kramer RK-PS1
- Page 1 K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODEL: RK-PS1 Rack Adapter for Power Supply P/N: 2900-300468 Rev 2...
-
Page 3: Table Of Contents
Recycling Kramer Products Overview Defining the RK-PS1 Mounting the RK-PS1 Available Power Supply Units Mounting the RK-PS1 to a Rack Shelf Technical Specifications Figures Figure 1: Defining the RK-PS1 Main Components Figure 2: Attaching the M5 Caged Nuts – Rear view Figure 3: M5 Caged Nuts Attached –... -
Page 4: Introduction
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and GROUP 14: Collaboration. Congratulations on purchasing your Kramer RK-PS1 Rack Adapter for power supply which is ideal for: ... -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer RK-PS1 away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Overview
Overview The RK-PS1 power supply adapter can hold one power supply and can be attached either to the RK-6PS rack adapter (detailed in the RK-6PS user manual) or directly to the rack shelf (see Section 4.2). Defining the RK-PS1 Figure 1... -
Page 7: Mounting The Rk-Ps1
RK-6PS user manual. Available Power Supply Units The RK-PS1 is suitable to hold any of the following power supplies (note, that each power supply must be ordered separately): Power Supply for: Power Specs 5V Power Supply Type... -
Page 8: Mounting The Rk-Ps1 To A Rack Shelf
Mounting the RK-PS1 to a Rack Shelf The RK-PS1 can be connected directly to the rack shelf using the Rack Plate. To do so: You need to use the RK-PS1 together with the rack plate. Set the arch shaped opening... -
Page 9: Figure 2: Attaching The M5 Caged Nuts - Rear View
Check the location in which you want to attach the RK-PS1 and squeeze-in the two M5 caged nuts from behind the location set for the RK-PS1, into the shelf square openings: Figure 2: Attaching the M5 Caged Nuts –... -
Page 10: Figure 3: M5 Caged Nuts Attached - Front View
Figure 3: M5 Caged Nuts Attached – Front view Use the two M5x12 screws and washers to attach the RK-PS1 to the rack shelf (the M5x12 screws fit into the M5 cage nuts): Figure 4: Mounting the RK-PS1 RK-PS1 - Mounting the RK-PS1... -
Page 11: Figure 5: The Mounted Rk-Ps1
Tighten the screws to complete the installation: Figure 5: The Mounted RK-PS1 Now you can connect the power supply cable to the device and then connect the C14 cable cord from the power supply to the mains electricity. RK-PS1 - Mounting the RK-PS1... -
Page 12: Technical Specifications
100-240V AC, 50/60Hz 100-240V AC, 50/60Hz OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE: -40° to +70°C (-40° to 158°F) HUMIDITY: 10% to 90%, RHL non-condensing Specifications are subject to change without notice RK-PS1 - Technical Specifications... - Page 14 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the RK-PS1 and is the answer not in the manual?
Questions and answers