Introduction - BluStream Multicast ACM500 User Manual

Introduction

Our UHD SDVoE Multicast platform allows distribution of the highest quality, uncompromised 4K with zero latency
Audio/Video over copper or optical fibre 10GbE networks.
The ACM500 Control Module features advanced third party integration of the SDVoE 10GbE Multicast system using TCP/
IP, RS-232 and IR. The ACM500 includes a web interface module for control and configuration of the Multicast system
and features 'drag and drop' source selection with video preview and independent routing of IR, RS-232, USB / KVM,
Audio and Video. Pre-built Blustream product drivers simplify Multicast product installation and negate the need for an
understanding of complex network infrastructures.
Features
• Web interface module for configuration and control of the Blustream SDVoE 10GbE Multicast system
• Intuitive 'drag & drop' source selection with video preview feature for active monitoring of system status
• Advanced signal management for independent routing of IR, RS-232, CEC, USB/KVM, audio and video
• Auto system configuration
• 2 x RJ45 LAN connections to bridge existing network to Multicast video distribution network, resulting in:
- Better system performance as network traffic is separated
- No advanced network setup required
- Independent IP address per LAN connection
- Allows simplified TCP / IP control of Multicast system
• Dual RS-232 ports for control of the Multicast system or pass-through of control to remote third party devices
• 5V / 12V IR integration for control of Multicast system
• PoE (Power over Ethernet) to power Blustream product from PoE switch
• Local 12V power supply (optional) should Ethernet switch not support PoE
• Support for iOS and Android App control (coming soon)
• 3rd party drivers available for all major control brands
Impotant Note:
The Blustream Multicast system distributes HDMI video over Layer 3 managed network hardware. It is advised that
Blustream Multicast products are connected on an independent network switch to prevent unnecessary interference,
or reduction in signal performance due to other network products bandwidth requirements.
Please read and understand the instructions in this manual and ensure that the network switch is configured correctly
prior to connecting any Blustream Multicast products. Failure to do so will result in problems with configuration of the
system and video performance.
Contact:
support@blustream.com.au
|
support@blustream-us.com
|
support@blustream.co.uk
ACM500
USER MANUAL
03