BluStream Multicast ACM500 User Manual page 8

Web-GUI Guide
The web-GUI of the ACM500 allows for full configuration of a new system, as well as on-going maintenance and
control of an existing system through a web portal. The ACM500 can be accessed on any network connected device
including: tablets, smart phones and laptops that are on the same network.
Sign In / Log In
Before logging in to the ACM500, ensure that the control device (i.e. laptop / tablet) is connected to the same network
as the ACM500's Control Port. There are instructions of how to amend the static IP address of a PC at the rear of this
manual.
To log in, open a web browser (i.e. Firefox, Internet Explorer etc.) and navigate to the default static IP address of the
ACM500 which is:
Please note: the ACM500 is shipped with a static IP address, and is not DHCP.
The sign in page is presented on connection to the ACM500. Once Users have been created within the system, this
screen will be populated with the Users previously configured for future log ins. The default admin PIN is:
Please note: The firs time you log in to the device you will be asked to update the password. Please record this
password as it is non-recoverable and you may need to factory reset the device in case of a lost password.
08
192.168.0.225
1 2 3 4
www.blustream.com.au
ACM500
| |
www.blustream-us.com
USER MANUAL
www.blustream.co.uk