Replaceable Parts - Agilent Technologies 54701A User's And Service Manual

Table 8
Chapter 3: Service
Troubleshooting and Repair

Replaceable Parts

Except for the accessories, which includes probe tips, there are few field
replaceable parts for the 54701A Active Probe. The replaceable parts are
listed in table 8 below. Accessory part numbers are listed in table 1, page 16.
Ordering Information
To order a part, quote the part number, indicate the quantity desired, and
address the order to the nearest Agilent sales office.
Direct Mail Order System
Within the USA, Agilent can supply parts through a direct mail order system.
There are several advantages to this system:
• Direct ordering and shipment from the parts center in California, USA.
• No maximum or minimum on any mail order (there is a minimum amount
for parts ordered through a local Agilent sales office when the orders
require billing and invoicing).
• Prepaid transportation (there is a small handling charge for each order).
• No invoices.
In order for Agilent Technologies to provide these advantages, please send a
check or money order with each order.
Mail order forms and specific ordering information are available through your
local Agilent sales office. Addresses and telephone numbers are located in a
separate document shipped with the manuals.
Replaceable Parts
Ref. Des. Description
A1 Exchange assembly, active probe
MP1 Label, active probe
MP2 Label, probe power box
MP3 Probe system caring case (without MP4 and MP5)
54
Qty Part Number
54701-69101
1 54701-94301
1 54701-94303