Table of Contents
Advertisement
Chapter 3: Service
Making Adjustments
Making Adjustments
This section provides an adjustment procedure for the 54701A Active Probe.
Equipment Required
Equipment required for adjustments is listed in the Recommended Test
Equipment table on page 39 of this chapter. Any equipment that satisfies the
critical specification listed in the table may be substituted for the
recommended model. Equipment for individual procedures is listed at the
procedure.
Adjustment Interval
There is no defined adjustment interval for the active probe. The adjustment
is considered a factory adjustment and does not require periodic maintenance.
Make adjustments only when directed by other service procedures. Defining
an adjustment interval will depend on your experience.
48
Advertisement
Table of Contents
