Step 4 - Mocka Locka Single Assembly Instructions Manual

Locka Single
Assembly Instructions
5
7
Insert bottom panel [7] by clicking into place as shown.
NB. If you ever need to take the shelves out to readjust their height,
please use a flat head screwdriver to loosen the clips from underneath.
mocka.co.nz | mocka.com.au
6
Insert 8x clips (A) into the back and front clip brackets at your desired
shelf height as shown. Place the two shelf panels [8] into the unit over
the clips to form the shelves.
A
8
A
x8
8
4