Summary of Contents for Mocka Soren King Single Bed
Page 1
Allen Key connector bolt hexagonal plastic glide x4 nuts x2 Hardware Supplied Phillips & hammer required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2
Assembly Instructions Panel layout Attach 2x panels [4] to panels [1], [2] and [3] secure with 16x bolts (L) and 16x washers (F). Tighten with a small Allen Key (B). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
(K) to panel [3] using a hammer. with 8x bolts (L). Tighten with a small Allen Key (B). Attach 2x plastic glides (K) to panels [5] using a hammer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Attach 2x elbow connector (H) to panel [6] and secure with 8x Attach panels [6] to panel [7] and secure with 6x bolts (G). Tighten with screws (D). Tighten with a screwdriver. a large Allen Key (J). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Attach panels [6] to panel [3] and secure with 6x bolts (G). Tighten with a large Allen Key (J). Tighten with a small Allen Key (B). Insert the 3x adjusters (E) into the bottom of panels [11] as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
Once in the correct position, rotate the adjusters (E) to Key (B). Attach panels [9] to panels [6] secure with 4x screws (A). the floor level. Ensure the unit is balanced and steady before use. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
Attach 11x panels [8] to panels [6] and secure with 22 x screws (A). Once assembled lift furniture into place, do not drag. You’re done, enjoy! Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Soren King Single Bed and is the answer not in the manual?
Questions and answers