Dismantling Of The Fan Unit - Eaton DualGuard-S ESF30 Mounting And Operating Instructions

7 Replacement of the fan unit
WARNING 230 V AC
Dangerous Voltage. Can cause death, heavy injuries and
property damage!
2. Disconnect and remove the temperature sensor.
Loosen the cable connection at the contacts of the termi-
nal block. Pull out the temperature-sensor with cable out
of the enclosure.
3. dismantling the fan unit:
Hold on the fan unit with one hand and loosen the two
screws (4,5 x 55 mm) at the fan with the other hand.
4. Remove the fan unit EBEL-VENT-L230 and the supply-
cable from the enclosure.
14
Mounting and Operating Instructions Fire-Resistant Cabinet Type DualGuard-S ESF30 October 2022 www.eaton.com