To View Custom Group Settings; To Modify Custom Group Settings - Konica Minolta PageScope Quick Manual

To view custom group settings

1. On the
Custom Group Setting
group whose settings you want to view (in the HTML mode, select
the check box to the left of the group name), and then click the
button.
View
2. This displays a list of devices included in the selected group.
Note
• Click to output the table information as a file in the CSV
format.

To modify custom group settings

1. On the
Custom Group Setting
group whose settings you want to modify (in the HTML mode,
select the check box to the left of the group name), and then click
the button. The
Edit
the List Manager are displayed.
2. Make the changes you want.
To rename a custom group
Type the new group name into the
To remove a device from the group
Clear the check box in the
to remove.
To add a device to the group
Select the check box in the
to add.
3. After everything is the way you want, click the
cancel the operation, click the
4. If you want to modify another custom group, select its group name
on the
Custom Group Setting
the check box to the left of the group name), and then click the
button. Next, repeat steps 2 and 3.
Edit
6 Configuring PageScope Net Care Settings
screen, select the name of the
screen, select the name of the
Group Name
Group
Group
Cancel
screen, (in the HTML mode, select
box and the managed devices in
box.
Group Name
column of the device you want
column of the device you want
Apply
button instead of
button. To
.
Apply
47