To Remove A Network From The Discovery Range; When Automatic Device Discovery Fails - Konica Minolta PageScope Quick Manual

6 Configuring PageScope Net Care Settings
In the HTML mode, no values are input automatically into the
Discovery From
blank, if you want. Leaving these boxes blank searches within the
range specified by the
boxes. If you want to specify a range, input the start address into
the
Discovery From
box.
To
5. After everything is the way you want, click the
clear all settings you have made on the setup screen, click the
button.
Cancel
6. If you also want discovery to find other maker's RFC-1759
Printer-MIB compatible devices, select the check box next to the
Enable Generic Device Discovery
button.
Apply

To remove a network from the discovery range

1. In the
Discovery Network / Range
want to remove from the discovery range and then click the
button.
Remove
2. In the Java mode, click the
dialog box that appears. The confirmation dialog box does not
appear in the HTML mode.
This selected network is deleted from the list.

When automatic device discovery fails

Click the button in the
Start
device discovery. Clicking the
in progress causes network discovery to restart from the beginning.
36
and
Discovery To
Network Address
box and the end address into the
Finish
Device Discovery
button while device auto discovery is
Start
boxes, and they can be left
and
Subnet Mask
Apply
option, and then click the
list, click the network you
button in the confirmation
section to restart network
Discovery
button. To