Settings In The Main Window - Konica Minolta bizhub PRO 1051 User Manual

Importing Images
3.6

Settings in the Main Window

The following settings and operations are available from the main window.
No. Item
1 Save/Restore Setting
2 Settings
3 Image
4 Area
5 PUSH Scan
6 Scan
7 Prescan
8 Select Devices
TWAIN driver
2 3
5 6
Description
Settings can be saved and loaded at a later time.
Set basic scan parameters. For details, refer to "Parame-
ters on the Settings tab" on page 3-12.
Set image-processing parameters. For details, refer to "Pa-
rameters on the Image tab" on page 3-14.
Specify the area to be scanned. For details, refer to "Pa-
rameters on the Area tab" on page 3-15.
Select this check box to start scanning when the [Start] key
in the control panel is pressed.
Begins scanning the selected document.
When the document is placed on the glass, a preview of the
scanned image can be shown at a coarse resolution. Doc-
uments can be scanned efficiently by performing a prescan
and adjusting the image or specifying an area to be
scanned before clicking [Scan].
Click this button to change the scanning device. For de-
tails, refer to "Selecting the Scanning Device" on page 4-1.
1 4
7 8
3
3-11