To configure Preference settings
1.
Configure the settings described below as required.
Status Polling Interval Section
•
Device List (min.)
SNMP Communication Setting Section
•
Timeout (sec.)
•
:
Retries
2.
After everything is the way you want, click the
cancel your settings, click the
6 Configuring PageScope Net Care Settings
:
Type in the update interval, in minutes, for
information about devices displayed in the
device list.
: Input the time in seconds that should be
allowed until the PageScope Net Care server
obtains information from a device following
an information request when there is an
update of information of a device displayed in
the device list.
Input the number of retries that should be
attempted when an attempt to obtain
information from a device fails.
Cancel
Apply
button instead of
button. To
.
Apply
29