Advertisement
Quick Links
Note!
1
No springs included in this kit. Use appropriate
Öhlins Front Fork springs, part no. 08762-XX.
See the Spring guide in this folder or contact
Öhlins for advice.
Note!
1
Please note that this image is a general
representation of the product and may differ
slightly from your product.
Note!
1
Please note that during storage and
transportation, especially at high ambient
temperature, some of the oil and grease used for
assembling may leak and stain the packaging.
This is in no way detrimental to the product, wipe
off the excessive oil/grease with a cloth.
TTX Cartridge Kit for Beta RR 2T/RR 4T
FCX 0302
Mounting Instructions
Kit Contents
Description
TTX Cartridge Kit
TTX Cartridge sticker
Sticker set Öhlins
Owner's manual
Base plug (with o-rings)
Circlip
Spacer 2 mm
Hydraulic stop cup
Sticker service schedule
MX fork & shock
Note!
1
Before installing this product, check the contents
of the kit. If anything is missing, please contact
an Öhlins dealer.
⚠
Warning!
Before installing this product, read the Öhlins
Owner's Manual. The shock absorber/front fork/
steering damper is an important part of your
vehicle and will affect the stability.
Part No
Pcs
FCX 0302
1
00191-63
2
1
07296-91
1
15430-21
2
15440-01
2
15443-02
14
15456-22
2
15211-01
1
Advertisement
Related Manuals for Öhlins FCX 0302
Summary of Contents for Öhlins FCX 0302
- Page 1 Kit Contents Description Part No TTX Cartridge Kit FCX 0302 TTX Cartridge sticker 00191-63 Sticker set Öhlins Owner’s manual 07296-91 Base plug (with o-rings) 15430-21 Circlip 15440-01 Spacer 2 mm 15443-02 Note! Hydraulic stop cup 15456-22 No springs included in this kit. Use appropriate...
-
Page 2: Special Tools
MOUNTING INSTRUCTIONS SPECIAL TOOLS Tool Part no Size Öhlins Fork cap 01892-03 50 mm tool, octagon OEM Fork cap 50 mm tool, decagon... - Page 3 MOUNTING INSTRUCTIONS Remove the original fork legs ⚠ Warning! We strongly recommend to let an Öhlins dealer install this product. ⚠ Warning! If you work with a lifted vehicle, make sure that it is safely supported to prevent it from tipping over. Note! When you work with this product, see the vehicle service manual for vehicle specific...
- Page 4 MOUNTING INSTRUCTIONS Install the Öhlins cartridge kit Use contact cleaner to clean the contact surfaces between the hydraulic stop cup and the fork bottom. Insert the hydraulic stop cup in the original fork leg, insert from the upper end of the fork tube. ✋...
- Page 5 MOUNTING INSTRUCTIONS Cartridge shaft end/ Use a 12 mm socket to tighten the cartridge Base valve plug shaft end into the base plug, turn counter clockwise and tighten to maximum 18 Nm. Do not over tighten. Install the security snap-ring at the shaft end groove.
-
Page 6: Setup Data
MOUNTING INSTRUCTIONS SETUP DATA Front fork length (OEM) Fluid volume (each leg) 0,340 litre Front fork length (Öhlins Fluid volume range 0,300-0,400 litre cartridge kit) Öhlins front fork fluid 01330-XX Front fork stroke (Öhlins cartridge kit) Öhlins cartridge kit length Rebound damping clicks Compression damping... - Page 7 MOUNTING INSTRUCTIONS SPRING GUIDE RR 2T Riders weight kg/pound* High Low High Low High Low High 60/132 65/143 70/154 75/165 80/176 85/187 90/198 95/209 100/220 105/231 110/242 115/253 120/264 125/275 RR 4T Riders weight kg/pound* High Low Mid High Low High Low High 60/132...
- Page 8 Öhlins products are subject to To find the latest information Part no. MI_FCX 0302_0 continuous improvement and contact an Öhlins distributor. Issued 2021-09-08 development, therefore, although Please contact Öhlins if you have these instructions include the most any questions regarding the up-to-date information available at contents in this document.