SYSTEM REQUIREMENTS – MACINTOSH
CPU:
Operation System: Mac OS 7.5.3 to 9.0.4
Memory:
Hard Disk Space:
Monitor:
CD-ROM Drive:
Recommended SCSI Board:
Other:
Power PC, Power Macintosh G3, Blue & White Power Macintosh G3 and
Power Macintosh G4
(Except for 68 K Macintosh and Mac OS compatible unit)
Power Macintosh G4 is recommended when loading with 16 bit and using
the Digital ROC/GEM functions.
A minimum of 32 MB (megabytes) application RAM in addition to the
requirements for the Mac OS.
256 MB or more when loading with 16 bit and using the Digital ROC/GEM
functions.
About 600 MB or more of available hard disk space.
About 2 GB or more of available hard disk space when loading with 16 bit
and using the Digital ROC/GEM functions. (About 3 GB or more is
recommended.)
Minimum 13 (640 x 480) inch monitor capable of displaying at least 32,000
Colors.
19 inch(1024 x 768) or larger is recommended.
Necessary (when installing the software.)
With a Power Macintosh and Power Macintosh G3
The standard built-in SCSI board
Connecting to the extension board inserted into the PCI bus/NuBus is not
available.)
With a Blue & White Power Macintosh G3*, Power Macintosh G4
Adaptec PowerDomain 2940UW/U2W, PowerDomain 2930U, SCSI Card
2906, and AVA-2903B
* Some models in the Blue & White Power Macintosh G3 series use the
Ultra2 Wide SCSI board as the standard built-in SCSI board, however,
connecting the Dimage Scan Multi II to the standard built-in SCSI board is
not recommended. The connecting capacity may be limited and the full
capabilities of the PC may not be usable due to the specifications of the
standard built-in SCSI board.
When using the model which has the standard built-in SCSI board, insert
the recommended SCSI board as described above in the open slot without
detaching the standard built-in SCSI board and then connect the Dimage
Scan Multi II to the SCSI connctor on the inserted SCSI board.
Adobe PhotoShop Ver. 4.0.1, Ver. 5.0.2, Ver. 5.5 and Adobe Photoshop 5.0
LE have been fully tested for use with the plug-in software.
– 8 –
Need help?
Do you have a question about the DIMAGE SCAN MULTI II F-3100 and is the answer not in the manual?
Questions and answers