Foreword Welcome PageScope Light Fiery Z4/X3e for CF9001 is a device control utility program provided by the HTTP server built into the Fiery Z4/X3e (printer controller for CF9001). With a standard Web browser, this utility can be used as an interface for remote control of the CF9001.
Contents CONTENTS 1 System Requirements ........1 2 Access ..............2 2.1 Operation ............2 3 Screen Configuration ........3 4 System Tab ............5 4.1 Summary ............5 4.2 Details ..............6 4.2.1 Input Tray ..........6 4.2.2 Output Tray ..........7 4.2.3 Hard Disk Status ........8 4.2.4 ROM Version ..........9 4.2.5 Interface Information ......10 4.2.6 Consumable Status .......11 4.3 Preference ............12...
Page 4
Contents 5 Printer Tab ............15 5.1 Printer Front Panel ..........15 5.2 Test Print ............16 5.3 PostScript Font ..........17 Appendix Status List ........
Solaris 2.5.1/2.6/7 (2.7) Netscape Navigator 4 or higher Linux Netscape Navigator 4 or higher • NIC (Network Interface Card) • Ethernet or Token Ring • TCP/IP Protocol CF9001 Printer Controller • Fiery Z4 for CF9001 (external) or Fiery X3e for CF9001 (built-...
2 Access 2 Access PageScope Light Fiery Z4/X3e for CF9001 can be accessed directly from a Web browser. Start the Web browser. In the URL field, enter the IP address of the printer controller as shown below. http:// <IP address of printer controller> / (Example) When the IP address of the printer controller is 192.9.200.200:...
3 Screen Configuration 3 Screen Configuration The configuration of the PageScope Light Fiery Z4/X3e for CF9001 screen is shown below. Note • Screen images shown in this manual may differ slightly from actual ones. In addition, specifications are subject to change without prior notice.
Page 9
This display shows information or settings in accordance with the selected menu item. Fiery WebTools Logo Clicking this logo displays the settings page for Fiery WebTools, which is built in to the printer controller. For details about Fiery WebTools, see the Fiery Z4/X3e Operator’s Guide...
4 System Tab 4 System Tab tab shows information about and settings for the CF9001 System system configuration. 4.1 Summary This screen is the initial screen when you access http://<IP address of printer controller> with your Web browser. You can also display the Summary screen by clicking the menu on the tab.
4 System Tab Configuration Summary This area shows an overview of the current CF9001 system configuration. 4.2 Details This screen appears when you click the menu on the Details System tab. It shows details about each of the CF9001’s units. Clicking a sub- menu under the menu displays information about the Details...
4 System Tab Capacity Maximum number of sheets that can be loaded in the tray Paper Remaining paper status (Shows Ready when paper is present, and when there is no Empty paper left.) 4.2.2 Output Tray This screen appears when you click the sub-menu under Output Tray Details...
4 System Tab 4.2.3 Hard Disk Status This screen appears when you click the sub-menu under the Hard Disk menu. It shows the status of the hard disk installed on the Details printer controller. Usage Percent of hard disk space used (%) Used Amount of hard disk space used (KB) Free...
4 System Tab 4.2.4 ROM Version This screen appears when you click the sub-menu under ROM Version menu. It shows information about the on-board memory of Details the CF9001 and the printer controller. Copier Version of ROM installed on the CF9001 Printer Controller Version of firmware installed on the printer controller...
4 System Tab 4.2.5 Interface Information This screen appears when you click the sub-menu under Interface Info menu. It shows information about the printer controller Details interface. Network I/F Network interface type (Ethernet 10/100BaseT or Token Ring) Local I/F Local port type...
4 System Tab 4.2.6 Consumable Status This screen appears when you click the sub-menu under Consumable menu. It shows the current status of CF9001 consumables. Details For information about consumables, see the CF9001 Operator’s Manual Black Toner Remaining black toner Yellow Toner Remaining yellow toner Magenta Toner Remaining magenta toner...
4 System Tab 4.3 Preference This screen appears when you click the menu on the Preference System tab. It lets you make changes to the PageScope Light environment. Password Type in the password here when a password is defined. Note that the password is case-sensitive, so be sure to type in upper-case and lower-case characters correctly.
4 System Tab Apply Button Click this button to apply any settings you have input or selected up to this point. Clear Button Click this button to cancel any settings you have input or selected up to this point. Note •...
Page 19
Website. Clicking the jumps Product Help URL to the Website you specify here. Minolta Corporate URL Type in the URL to the Minolta home page. Clicking the jumps to the Minolta Corporate URL Website you specify here. Tel Number for Supplies and Accessories...
5 Printer Tab 5 Printer Tab tab shows information and settings for printing on the Printer CF9001. 5.1 Printer Front Panel This screen appears when you click the menu on Operational Panel tab. It provides on-screen emulation of the printer Printer controller’s operational panel.
5 Printer Tab 5.2 Test Print This screen appears when you click the menu on the Test Print Printer tab. It lets you select a test print page and execute a test print operation. Config Page Insert a check mark into the box to print the printer controller setup page.
5 Printer Tab 5.3 PostScript Font This screen appears when you click the menu on the Font Info Printer tab. It shows a list of PostScript fonts built into the printer controller. The names of fonts downloaded to the printer controller from the computer are added to the bottom of the list.
Appendix Status List Appendix Status List The current CF9001 status is indicated by an icon in the upper part of the window, and by text next to the icon in the upper text area. More detailed messages appear in the lower text area. The contents of the list are arranged in order of importance (most critical first).
Page 24
Appendix Status List Status Icon Details (Lower Text) Description (Upper Text) Ready Warming Up Power Save The machine is in power save mode. Processing (Blank) The machine is ready.
Page 26
Copyright 2000 MINOLTA CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. MINOLTA CO., LTD. Image Information Products Marketing Headquarters 3-13, 2-chome, Azuchi-machi, Chuo-ku, Osaka. 541-8556, Japan...