Minolta DIMAGE SCAN MULTI II F-3100 Instruction Manual page 11

INSTALL THE SOFTWARE
9 To install the software into the direc-
tory in the default setting ;C:\Program
Files\DS_Multi II, click on [Next >].
• The "Setup Type" dialog box will appear.
• To select another destination directory, click
on [Browse...] and select the directory. Click
on [OK].
10
Select the setup type and click on
[Next >].
• Normally, select "Typical" When the DS Multi
II Utility software is not used, select [TWAIN
File].
• When [Next >] is clicked on, the [Select
Program Folder] dialog box appears.
11 The name of the program folder in
which program icons will be added is
displayed. Confirm the name and
click on [Next >].
• Setup will begin.
• When setup is complete, the "Setup is com-
plete and Minolta Dimage Scan Multi ver.2.0
is now installed!" dialog box appears.
12 Make sure that the message "Yes, I
want to restart my computer now." is
checkmarked and click on [Finish].
• Your computer is restarted.
– 11 –