Making An Index Scan - Minolta DIMAGE SCAN MULTI II F-3100 Instruction Manual

INDEX SCAN

MAKING AN INDEX SCAN

• There are two modes of the index scan; [High-Speed Scan] and [High-Quality Scan]. These
modes can be switched in the Preferences. The default setting (after installing the software) is
[High-Speed Scan].
• To cancel the index scan halfway:
Windows Press the Esc key.
Macintosh Press Command and the period key simultaneously.
• To delete all index images displayed in the Main window:
When the Index window is activated (displayed in the front),
Windows Press Ctrl, Shift, and R simultaneously.
Macintosh Press Command, Shift and R simultaneously.
1 Insert the film holder into the scanner
as instructed by the hardware manu-
al.
• Index scans can only be performed when
using the 35mm film holder, slide mount
holder, or optional APS adapter.
2
Click on
• All frames will be scanned and appear in the
Index window in the order in which the
frames are scanned.
• When using the 35mm film holder, the
frames are scanned in the following order: 1,
2, 4, 3, 5, 6. This is not a malfunction but for.
The index images are displayed in the order
of 1, 2, 3, 4, 5, 6.
– 23 –
in the Main window.