Table of Contents
Advertisement
Loading Paper onto Tray 2/Tray 3
Note
• Make sure that the Tray 2/Tray 3 cassette for the proper size of paper
to be used for printing has been installed into the second/third paper
cassette unit. For instructions on inserting (and removing) the Tray 2/
Tray 3 cassette into (and from) the second/third paper cassette unit,
refer to Chapter 2.
1
Slide Tray 2/Tray 3 out of the second/third paper cassette unit
as illustrated.
Tray 2
Note
• The cassette is designed to remain in the unit during the normal loading
and operation of the printer. To remove Tray 2/Tray 3 from the unit,
pull it out as far as it will go without force. Then gently raise the for-
ward-end up, and remove Tray 2/Tray 3 from the unit.
• Tray 3 is available as an option for this printer. Contact Minolta Tech-
nical Support to find out how you can acquire this tray to increase the
capabilities of your printer.
Loading Paper
Tray 3
3-7
Advertisement
Table of Contents
