DOS Printing Utilities
Using the Status Display
This section describes how to display the Status Display and make
changes in the operating environment of the Status Display.
To Display the Status Display
After the Status Display is loaded, perform the required hot key
combination (a combination of keys you press at the same time to
perform an operation) to display the Status Display. The following is
the default hot key combination:
[ctl]+[alt]+[R]
After the Status Display screen is displayed, you can change the hot
key combination.
To select the
, highlight
by pressing the
key
Setup Menu
Setup
Tab
and then press the
key. The
will be displayed.
Enter
Setup Menu
To select an item on the Status Display, first highlight it, then press the
key to advance to its setting screen.
Enter
The following is a brief explanation of the items that are available on
the Status Display. Further information can be found in the Status
Display's online help.
4-63