Windows 3.1
Installing the Software
NOTE
• Make sure that the printer is connected to your computer with
the recommended parallel cable.
1.
Turn on the printer.
2.
Turn on your computer and start up Windows 3.1.
3.
Insert the diskette labeled
Software for Windows 3.1
drives. For this example, we will assume that the diskette is
located in drive A:\.
4.
From the
Program Manager
Main group, and then double-click
20
PageWorks 20 PostScript Printer
into one of your computer's disk
, double-click
Main
File Manager
to display the
.