Introduction
The Minolta PageWorks 20 PostScript Printer Software allows you
take full advantage of your printer's features and capabilities using
your computer running Windows 95. This chapter describes how to
install this software while explaining the software's features.
System Requirements
The following list contains the system requirements necessary for
optimal operation of the Minolta PageWorks 20 PostScript Printer
Software.
• Operating System: Microsoft Windows 95.
• Personal Computer: IBM-compatible PC with at least a 486SX
33Mz CPU, or faster CPU (Pentium processor recommended).
• I/O Interface: Standard PC parallel printer port and cable.
• Memory: At least 12MB PC RAM (16MB recommended).
• Free Hard disk Space: Approximately 2MB for files.
• Disk Drive: 3.5-inch drive with 1.4MB capacity is required for
installation only.
• Display: VGA (640 x 480-dot) or higher resolution.
NOTE
• Use of a poor quality parallel cable may adversely affect the
input.
Windows 95
11