Windows 3.1; Introduction; System Requirements - Minolta PageWorks Pro 20 Install Manual

Postscript
Hide thumbs Also See for PageWorks Pro 20:
Table of Contents

Advertisement

Introduction

The Minolta PageWorks 20 PostScript Printer Software was
provided by Adobe Systems Incorporated, and allows you take full
advantage of your printer's features and capabilities using your
computer running Windows 3.1. This chapter describes how to
install this printer driver while explaining the driver's features.

System Requirements

The following list contains the system requirements necessary for
optimal operation of the Minolta PageWorks 20 PostScript Printer
Software.
• Operating System: Microsoft Windows 3.1 or later.
• Personal Computer: IBM-compatible PC with at least a 386DX
16Mz CPU, or faster CPU (Pentium processor recommended).
• I/O Interface: Standard PC parallel printer port and cable.
• Memory: At least 4MB PC RAM (8MB recommended).
• Free Hard disk Space: Approximately 2MB for files.
• Disk Drive: 3.5-inch drive with 1.4MB capacity is required for
installation only
• Display: VGA (640 x 480-dot) or higher resolution.
NOTE
• Use of a poor quality parallel cable may adversely affect the
input.

Windows 3.1

19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pageworks 20

Table of Contents