Konica Minolta Magicolor 5440 DL User Manual page 37

ENERGY SAVER
AUTO CONTINUE
TRAY CHAINING
Configuration Menu Overview
Settings
15 MINUTES / 30 MINUTES
/ 60 MINUTES / 120 MIN-
UTES
Sets the length of time until the printer enters
Energy Saver mode after it no longer receives
print jobs or is not operating.
The Energy Saver mode is automatically can-
celled when any of the following occurs:
# The printer is restarted.
# A print job is received.
# Any key on the control panel is pressed.
# The front cover or right side cover is
opened, then closed.
# A tray is opened, then closed.
Settings
ON / OFF
When set to ON , the printer continues printing
if the correct size media is not loaded in the
specified tray.
OFF
When set to , the printer stops and
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.
Settings
ON / OFF
When set to ON , the printer automatically
switches to a different tray containing media
of the same size and type, if the specified tray
runs out of media.
When set to OFF , the printer stops and
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.
27