Konica Minolta Magicolor 5440 DL User Manual page 141

This message...
FUSER
NOT ATTACHED
MANUAL FEED TRAY
NOT INSTALLED
MEDIA JAM
DUPLEX LOWER
MEDIA JAM
DUPLEX UPPER
MEDIA JAM
FUSER
MEDIA JAM
MANUAL FEED TRAY
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
TRAY X
MEDIA JAM
UNDEFINED
PUT MEDIA : M-TRAY
"MEDIA"
Status, Error, and Service Messages
means...
The fuser unit is not
installed.
The manual feed tray
was specified with the
printer driver for print-
ing, but the manual
feed tray is not
installed.
Media has misfed in
the duplex option.
Media has misfed in
the duplex option.
Media has misfed
leaving the fuser
area.
Media has misfed in
the manual feed tray.
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the paper
exit area.
Media has misfed
while being pulled
from the specified
tray (X).
A media misfeed
occurred because the
driver settings are
inconsistent.
The media type set in
the printer driver is
different from the type
of media loaded into
the manual feed tray.
do this...
Contact Technical Sup-
port with the error infor-
mation.
Install the manual feed
tray.
Locate and remove the
misfeed.
After clearing the media
misfeed, check the
driver settings.
Load the correct media
type into the manual
feed tray.
131