Error Messages (Warning) - Konica Minolta Magicolor 5440 DL User Manual

Error Messages (Warning)

Note
If an error message (
print out the configuration page, and then check the status of the other
consumables. For details on printing the configuration page, refer to
"Printing the Configuration Page" on page 96.
This message...
FUSER LIFE END
FUSER LIFE LOW
INCORRECT CART.
X
SIZE MISMATCH
TONER EMPTY
X
X TONER LOW
128
TONER EMPTY , TRANSFER END
means...
The fuser unit has
reached the end of its
life.
The fuser unit is near
the end of its life.
The X toner cartridge
is an unapproved
type.
A media size mis-
match occurs when
AUTO CONTINUE
(Engine menu) is set
to ON .
The X toner cartridge
is empty.
(Appears when
ENGINE/TONER
EMPTY CONTINUE
is set)
The X toner cartridge
is low and should be
replaced within 200
pages at 5% cover-
age of letter/A4
pages.
Status, Error, and Service Messages
, etc.) appears,
do this...
Contact Technical Sup-
port with the error infor-
mation.
If necessary, contact
Technical Support with
the error information.
Install a
KONICA MINOLTA toner
cartridge of the appropri-
ate type (AM, EU, AP or
JP), see page 67.
Load the correct media
size.
Replace the toner car-
tridge.
Prepare the specified
color toner cartridge.