Konica Minolta Magicolor 5440 DL User Manual page 129

Symptom
Printer
resets or
turns off fre-
quently.
You are
experienc-
ing duplex
problems.
With N-up on
multiple cop-
ies, the out-
put is
incorrect.
Booklet Left
and Right
Binding out-
put is incor-
rect.
Solving Other Problems
Cause
The power cord is not
correctly plugged into
the outlet.
A system error
occurred.
Media or settings are
not correct.
Both the driver and
the application have
been set for collation.
Both the driver and
the application have
been set for collation.
Solution
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Contact Technical Support with the
error information.
For autoduplexing, make sure that you
have a duplex option installed.
Make sure that you are using correct
media.
# See "Media Specifications" on page
38.
# Do not duplex custom-sized media,
envelopes, labels, postcards, thick
stock, or transparencies.
# Make sure that you have not mixed
media types in the manual feed tray.
Make sure that your document has
more than one page.
Make sure the duplex option is installed
and declared in the Windows printer
driver (Device Option Setting tab).
In the printer driver (Setup/Duplex/
Booklet), choose "Short Edge Binding"
(flipped as on a clipboard) or "Long
Edge Binding" (flipped as in a
loose-leaf notebook).
For N-up on duplexed pages, choose
Collate only in the driver's Paper Tab.
Do not set collation in the application.
For N-up on multiple copies, choose
Collate only in the driver's Paper Tab.
Do not set collation in the application.
For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the driver's Paper Tab. Do not set colla-
tion in the application.
119