Advertisement
4
Repeat for every bed slat until finished.
Step 8
1 x Allen Key
(H5)
Ensure the inner space is square.
Place the felt pad (H6) on the centre of the centre rail (P7) as shown. Secure the timber cross
rail (P9) into place in the centre of the side rails (P4/P5) using 2 x screws (H7), and tightening
fully with the Phillips Head Screwdriver.
You may now fully tighten all bolts on the headboard (P1), footboard (P3) and
side rails (P4/P5).
fantasticfurniture.com.au
You will need
2 x Screws
1 x Felt Pad
(H6)
(P9)
(H6)
Phillips head Screwdriver
(not provided)
(H7)
(H5)
(P7)
Ensure the screws
are fully tightened.
(H7)
(P9)
(H5)
Page 10
Advertisement
