Installing The Accessory Cabinet; Wiring Each Devise And Finishing Installation - Vatech PaX-Reve3D Installation Manual

3.4.

Installing the accessory cabinet

1. This is to mount the accessory cabinet on the column.
Just attach the cabinet after adjusting two bolts on the side of the column
3.5.
Wiring
1. Connecting wires to the connector panel on the back of column.
Please connect the RS-232, X-Ray exposure switch cable, Up/Down switch and LAN cables to the
connector panel on the back of column.
PaX-Reve3D
26
each devise and finishing
installation