International Notices; Warranty Considerations - MINOLTA-QMS Magicolor 2200 DP Installation Manual

Since radiation emitted inside the printer is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine during any
phase of user operation.

International Notices

Power Cord
The following power cord requirements are in effect for the 220v magicolor 2200.
Minimum
Minimum
Voltage
Attention Norwegian users: This equipment is designed to operate within an IT power
system where the line-to-line voltage does not exceed 240v.
Lithium Batteries
Attention Swiss users: Lithium batteries need to be disposed of in accordance with
Annex 4.1 of SR814.013.

Warranty Considerations

Various factors can affect a printer's warranty. Two important ones are consumables
and electrostatic discharge. Read your printer warranty carefully.
5 "
Don't return any merchandise to the manufacturer without calling for a return
merchandise authorization (RMA) number. Refer to the Service & Support Guide for the
Support telephone number where you can obtain an RMA number.
If you have any questions, refer to www.minolta-qms.com.
60
2
0.75 mm
H05 VV - F
„
The male plug is certified in the country in which the equipment is to be
installed, and the female plug is an IEC 320 connector.
Warranty Considerations