Extended Menu 5 Optional Sensors - Hardi HC5500 Service Manual

Extended Menu 5 Optional sensors

E5.1 Pressure
E5.2 Fan speed
Optional
E5 sensor E5.3 TankGauge
E5.X Sensor x
E5.1.1 Minimum
Connected
to section
valve PCB.
E5.1.2 Maximum
E5.2.1 PPU
Connected
to section
valve PCB.
E5.3.1 Sensor Type
For sprayers
with
Breakout
PCB or
JobCom.
E5.3.2
Only with
Breakout
PCB or
JobCom E5.4 Wind speed
E5.5
E5.6
E5.7
E5.8 RPM sensor
E5.9 Extra 1
E5.10 Extra 2
E5.11 Extra 3
E5.12 Extra 4
[-9.9 to 9.9]
Default is 0.0 Bar
4 -20 mAmp sensor.
See sensor for minimum value.
See "Pressure sensor" section.
[0 to 99.9]
Default is 10.0 Bar
See sensor specifications for maximum value.
[0 to 99.99 PPU]
Default is 1
Digital input.
One pulse per revolution = 1.00 PPU.
See "Fan speed" on TWIN section
[Not present, Fillmeter, ME Tank Control,
Hardi]
For Hardi TankGauge, choose Hardi.
PPU
[0.000 to 999.999 PPU ]
Connect to Breakout PCB or JobCom.
See "TankGauge" section.
Hardi has the TankGauge 0-250mbar pressure
transducer fitted to sump.
Wind
direction E5.5.1
E5.5.2
Air
temperature
E5.6.1
E5.6.2
Relative
humid E5.7.1
E5.7.2
E5.11.1
E5.11.2
E5.12.1
E5.12.2
Page 21 of 87
Unit Default
PPU 1
min 0
max 359
min -20
max 70
min 0
max 100
PPU 1
PPU 1
PPU 1
min 0
max 5
min 0
max 5