The display shows:
To program the next landing, proceed in the following manner:
– Press the Prog. button on the car CPU until the Prog. LED is
illuminated.
– Press the Stop Next Landing button and keep it depressed
while the Up button is pressed.
– Release the Stop Next Landing button and after that the Up
button.
The system will unlock the doors one by one.
Open suitable door for the landing in question.
The display shows:
TEST!
Construction Hoist
Press 0 + ENT. The 1st car door will be unlocked. No car
movement will appear.
The display shows:
Press 1 + ENT. The 1st car door will be unlocked. No car
movement will appear.
The display shows:
Permanent Lift
Press 0. The 1st car door will be unlocked. No car movement
will appear.
The display shows:
Press 1. The 2nd car door will be unlocked. No car movement
will appear.
The display shows:
0 lights up on the display
for the single system.
1 lights up on the display
for the single system.
ALIMAK 34838 - 1 /04
A
35
+
+
Need help?
Do you have a question about the ALC II and is the answer not in the manual?