Remove And Disassemble The Llcit - QMS 3225 Tray Module Installation Manual

Changing LLCIT
Paper Size
Changing LLCIT Paper Size
Changing the paper size for the LLCIT requires special care to avoid
damaging electrical connections. We recommend that you:
Evaluate your printing needs and choose one size for the LLCIT
Have the service representative set the LLCIT for that size
during installation
Do not alter the size setting
» Note: Only a qualified QMS service technician should change the LLCIT size
settings. The following instructions are included to assist service personnel.
If you damage the printer or the Large-Large-Capacity Input Tray while
changing the size settings, it will affect your warranty.
WARNING! It takes two people to lift the LLCIT in and out of the
printer. Do not lift the LLCIT with paper loaded in it.
ACHTUNG! Man benötigt 2 Personen um den LLCIT zu tragen. Tragen
Sie den LLCIT nie mit eingelegtem Papier.

Remove and Disassemble the LLCIT

» Note: Before you begin this procedure, note the paper size setting. You will
need to know what you are changing from to complete the process.
1 Remove the upper and lower input bins.
2 Press the Tray Down
button.
3 As soon as the tray
moves down enough to
remove the paper, open
the door to stop the tray
movement.
4 Remove all the paper.
4 QMS 3825/3225 Large-Large-Capacity Input Tray Option