Table of Contents
Advertisement
Changing the
LLCIT Paper Size
2
Replace the indicator area cover by aligning it in front of the
body and sliding it straight back, being careful that the mag-
netic door catch is accessible and that the tongues at the
back of the cover are inside the housing.
3
Reinsert the three silver screws you removed when access-
ing the DIP switches.
4
Close the lid and the door, making sure the door snaps shut.
5
Insert the LLCIT as you would any paper cassette, lining up
the guides with the support rails and sliding the LLCIT until
it snaps into place.
WARNING!
Do not lift the LLCIT with paper loaded in it.
ACHTUNG! Man benötigt 2 Personen um den LLCIT zu tragen.
Tragen Sie den LLCIT nie mit eingelegtem Papier.
6
Reinstall the prop plate you removed at the outset of this
process.
18
QMS 3825/3225 Large-Large-Capacity Input Tray Option
It takes two people to lift the LLCIT back into place.
Advertisement
Table of Contents
