Table of Contents
Advertisement
Item
Description
Connect the power cable from the 10SFF Express Bay backplane to
2
the 2SFF Express Bay backplane.*
Connect the mini-SAS cable from the 10SFF Express Bay backplane
3
to Port 1 on the controller (HPE Smart Array P440ar Controller
shown).
Connect the 2SFF Express bay data cable from 2SFF Express Bay
4
backplane to Port 3 on the HPE Express Bay Bridge Card.*
Connect the 10SFF Express bay data cable from 10SFF Express Bay
5–6
backplane to Ports 1 and 2 on the HPE Express Bay Bridge Card.
*If the 2SFF Express Bay Enablement option is not installed, then this cable is not required.
HPE Smart Array P440ar controller cabling
Connect the SAS/SATA cables to the backplane and Smart Array controller. Install the SAS/SATA cables
according to their labels as Port 1 or Port 2. These labels are on the cables and their connections.
•
8SFF
Cabling 115
Advertisement
Table of Contents
