Hpe 1400W Flex Slot Platinum Plus Hot-Plug Power Supply - HP BCDVideo BCD108 User Manual

Table of Contents

Power supply output

Rated steady-state power (W) 800 W at -40 VDC to -72 VDC

Maximum peak power (W)

WARNING: To reduce the risk of electric shock or energy hazards:

• This equipment must be installed by trained service personnel, as defined by the NEC and

IEC 60950-1, Second Edition, the standard for Safety of Information Technology

Equipment.

• Connect the equipment to a reliably grounded Secondary circuit source. A Secondary

circuit has no direct connection to a Primary circuit and derives its power from a

transformer, converter, or equivalent isolation device.

• The branch circuit overcurrent protection must be rated 27 A.

CAUTION: This equipment is designed to permit the connection of the earthed conductor of

the DC supply circuit to the earthing conductor at the equipment.

If this connection is made, all of the following must be met:

• This equipment must be connected directly to the DC supply system earthing electrode

conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC

supply system earthing electrode conductor is connected.

• This equipment must be located in the same immediate area (such as adjacent cabinets) as

any other equipment that has a connection between the earthed conductor of the same DC

supply circuit and the earthing conductor, and also the point of earthing of the DC system.

The DC system must be earthed elsewhere.

• The DC supply source is to be located within the same premises as the equipment.

• Switching or disconnecting devices must not be in the earthed circuit conductor between

the DC source and the point of connection of the earthing electrode conductor.