Optional Service Rail Kit - HAMPTON BAY Greenfire GCi60-2 Owner's Manual

Routine Cleaning and Maintenance

Optional Service Rail Kit

1. Remove Cast Ash Drawer Front.
2. Slide open the Cast Top.
3. Lift off Cast Sides.
4. Clip Side Rails to unit.
5. Attach Front Rail using the quick release pins
as shown in Fig. 12.
6. Adjust leg height and lock them in using
the thumb screws. (Fig 12)
7. Slide unit forward on rails.
14
(Part number GCI60-900)
Quick Release Pin
Thumb Screw
Figure 12: Close up of Front Rail
Figure 11: GCI60 with Service Rail Kit
Cleaning Your Pellet Stove
Hampton GCi60-2 Cast Pellet Insert Owner's Manual