Table of Contents
Advertisement
4-3. Setup – Record Mode
In the SETUP menu, select the Record tab. Then, the Record menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control.
Menu Item
Select a channel for applying the following settings using the mouse or the remote
Site
control. To change the values of all channels, take the following steps. Select the
button "select" to change the values of all channels.
Recording
Assign the recording mode for the selected channel.
Mode
Options are: Continuous, Motion, Schedule or Disable.
Select the sensor setting for the selected channel.
Sensor
Recording
Pre Record
Enable/disable pre-event recording. Pre-event recording time is up to 20 minutes.
Post Event
Set the post event recording time duration for the specified channel.
Record
(10~30 seconds)
Enable/disable audio recording for the specified channel.
Audio
Set the recording schedule.
Schedule
Figure 4.3.1. Record Setup Screen
Table 4.3.1. Menu Items in Record Setup Screen
Description
39
Advertisement
Table of Contents
