Appendix: E-Sata Connection - Speco N8NU User Manual

APPENDIX: E-SATA Connection

Please read the following instructions before using the E-SATA port.
Failure to do so may cause serious damage to the recorded video.
SPECO is not responsible for data loss caused by improper usage.
 Use ONLY a new HDD or a HDD that is approved for the unit.
 Turn off the NU before plugging the E-SATA HDD.
 DO NOT disconnect the E-SATA port while the NVR power is on.
 The purpose of the E-SATA port is to extend recording capacity.
 Once connected, DO NOT removes or disconnects the E-SATA port from the NVR.
 The E-SATA port is does not support the hot swappable function.
111