Operation
6.3
Key Pad
The six keys on the CP435 include one menu key and six functional keys
(F1-F6), described below. Press the menu key to slide out the innovative slide-
out menu.
The functional keys can also be defined in CP400Soft and used as "Quick-
buttons", for example, to set an ON/OFF value, to change a screen etc. For
further information about the slide-out menu, please see the CP400Soft User's
Manual.
Menu key
Functional keys F1-F6
When a key is pressed, the operator terminal will make a "beep" sound to signal
that a command is pressed. The default setting, a 200 ms beep, can be config-
ured.
ABB, 1SBC159108M0201
19