ABB CP435 Installation And Operation Manual page 28

Operation
Scenario 3: Password-protecting a button in the operator terminal
The designer can create a button which is protected by a password for execution.
For example, a Goto Screen button can be designed with a high level of security;
which means that a password with a high level of privilege is required in order
to open the other screen. As the button is selected and the current user has a low-
er privilege than has been set for the button, the operator terminal will prompt
the user for a password. The user will need a password with at least the level of
privilege that has been set for the button. This function can restrict users to ac-
cess to certain parts of the application.
Scenario 4: Requiring a password to copy or upload application
When selecting F3 - Copy in the system menu or File/Upload Application in
CP400Soft, the operator terminal will prompt for a password. The user will
need to enter the correct password to copy an application from one
CP435 to another. Note that setting this password is different from the pass-
words set in Scenarios 1-3. To set this password, select Application/Workstation
Setup in CP400Soft. Under the Password tab, the designer is able to set the
password.
28 ABB, 1SBC159108M0201