Table of Contents
Advertisement
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
2-6-2 Headers
(1) VGA Connector (2x 8-pin) : VGA (for 650EM/650EML)
(2)
Line-Out/MIC Header for Front Panel (9-pin): AUDIO
This header connect to Front Panel Line-out, MIC connector with cable.
Without install the cable, this header default setting is 5-6 short, 9-10 short. When you
install the cable you have take off these jumpers.
(3)
USB Port Headers (9-pin) : USB1/USB2
Pin 1
Secondary IDE Connector
VG A
16
15
2
1
VGA Connector
AUDIO
Pin 1
2
AUD _ G ND
AUD _ MIC
AUD _ VC C
AUD _ MIC _ BIAS
AUD _ FPO UT _ R
AUD _ RET _ R
HP _ O N
AUD _ R ET _ L
AUD _ FPO UT _ L
9
10
Line-Out, MIC Headers
15
Advertisement
Table of Contents
