Main Memory Configuration - CHAINTECH 7VIL User Manual

AMD Athlon CPU (K7/Thunderbird)
FSB
Model CPU Speed Multiplier Vcore
Frequency
700 100
700MHz
750 100
750MHz
800 100
800MHz
850 100
850MHz
900 100
900MHz
950 100
950MHz
1000 100
1000MHz
1100 100
1100MHz
1200 100
1200MHz
1300 100
1300MHz
1400 100
1400MHz
1000 133
1000MHz
1113 133
1113MHz
1200 133
1200MHz
1333 133
1333MHz
1400 133
1400MHz
AMD Athlon XP CPU (Palomino/Thunderbird)
CPU FSB
Model Multiplier Vcore
Speed Frequency
1500+ 1333MHz 133 10.0
1600+ 133 10.5
1400MHz
1700+ 133 11.0
1466MHz
1800+ 133 11.5
1533MHz
1900+ 133 12.0
1600MHz
2000+ 133 12.5
1666MHz
2100+ 133 13.0
1733MHz
2200+ 133 13.5
1800MHz
2400+ 133 15.0
2000MHz
2600+ 133 16.0
2133MHz
Chapter 2
L2 Micron
Cache process
7.0 1.70V 256KB 0.18
7.5 1.70V 256KB 0.18
8.0 1.70V 256KB 0.18
8.5 1.70V 256KB 0.18
9.0 1.75V 256KB 0.18
9.5 1.75V 256KB 0.18
10.0 1.75V 256KB 0.18
11.0 1.75V 256KB 0.18
12.0 1.75V 256KB 0.18
13.0 1.75V 256KB 0.18
14.0 1.75V 256KB 0.18
7.5 1.75V 256KB 0.18
8.5 1.75V 256KB 0.18
9.0 1.75V 256KB 0.18
10.0 1.75V 256KB 0.18
10.5 1.75V 256KB 0.18
L2 Micron
Cache process
1.7V 256KB 0.18
1.7V 256KB 0.18
1.7/1.6V 256KB 0.18/0.13
1.7/1.6V 256KB 0.18/0.13
1.7/1.6V 256KB 0.18/0.13
1.7/1.6V 256KB 0.18/0.13
1.7/1.6V 256KB 0.18/0.13
1.65V 256KB 0.13
1.65V 256KB 0.13
1.65V 256KB 0.13
7
Chapter 2

2-3 Main Memory Configuration

This motherboards provides 2 184pin Double Data Rate (DDR) Dual Inline Memory
Modules (DIMM) slots. Which supports PC 1600/DDR200 or PC2100/DDR266
DDR SDRAM modules up to 2GB. Install at least one DIMM module on the slots.
Memory modules can be installed on the slots in any order. You can install either
single- or double-sided modules to meet your own needs. The DDR SDRAM
memory system consists three banks and each bank can support up to 1GB memory
size. If you only use one bank it does not matter which one you use and if you use
two or more banks, it does not matter which bank you install first.
DRAM Specifications
DIMM type: 2.5V, unbuffered 64/128/256/512-bit DDR SDRAM.
Module size: Single/double-sided 64/128/256/512 Mbytes /1GB .
Parity: Ether parity or non-parity.
DIMM Module Combination
Install at least one DIMM module on the slots. You can install either single- or
double-sided modules in any order to meet your own needs. Memory modules can
be installed in any combination as follows:
Location 64 MB 128 MB 256 MB 512 MB
DDR 1 X X
DDR 2 X X
To install your DDR Modules please follow the following steps:
1. Unlock a DIMM socket by pressing the retaining clips outward. The DDR
Modules has only one notch at the center of module. The DDR module will only
fit in the right position.
2. Insert the DDR Module vertically into the DIMM slot, with the correct alignment.
Then push it in until the golden finger on the memory module is deeply inserted
into the socket.
3. The plastic clip on each side of the DIMM slot will automatically close to hold the
DDR Modules in place.
8
1.0 GB
X X X
X X X