Table of Contents
Advertisement
Fitting the rotor
Check and clean the driveshaft using a mild detergent and damp cloth.
l
Remove the cover from the new rotor. Examine the rotor to ensure that the "A" symbol appears on
l
the rotor as shown below. If there is not an "A" symbol on the rotor then DO NOT fit this part and
contact Watson- Marlow aftersales for the correct ATEX component. Any letter other than an "A"
indicates that the rotor is not suitable for ATEX applications and if fitted may result in an electrostatic
hazard.
ATEX Rotor
13
ATEX Rotor is marked with an "A" in position
shown
PB0347:m-620atex-en-03
Advertisement
Chapters
Table of Contents
