Ieee 1394 Port - Dell Latitude E6410 ATG Service Manual

Back to Removing and Replacing Parts

IEEE 1394 Port

Dell™ Latitude™ E6410/E6410 ATG Service Manual
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the IEEE 1394 Port
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the
3. Remove the battery.
4. Remove the
5. Remove the
6. Remove the ExpressCard.
7. Remove the
8. Remove the
9. Remove the
10. Remove the
11. Remove the
12. Remove the
13. Remove the keyboard.
14. Remove the
15. Remove the memory.
16. Remove the
17. Remove the
18. Remove the Latitude On™ Flash/CMG module.
19. Remove the
20. Remove the
21. Remove the
22. Peel back the Ferrite sheet covering the firewire cable.
23. Disconnect and unthread the firewire data cable from the system board.
24. Remove the screws that secure the IEEE 1394 board to the computer.
25. Remove the IEEE 1394 board from the computer.
Replacing the IEEE 1394 Port
To replace the IEEE 1394 port, perform the above steps in reverse order.
Back to Removing and Replacing Parts
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Before Working Inside Your
ATG Port Cover (applicable on E6410 ATG computer only).
SIM card.
SD card.
Smart card.
hinge covers.
access panel.
optical drive.
hard drive.
LED cover.
coin-cell battery.
WWAN card.
WLAN card.
Fingerprint Reader.
Heat Sink and Processor Fan.
Display Assembly.
UserManuals.info
Computer.