Accessing The Website Of The Device; Factory Reset; Factory Reset Using The Factory Reset Button On The Device; Factory Reset Using The Website Of The Device - ISE smart connect Modbus Vaillant Product Manual

5.3

Accessing the website of the device

To access the website of the device, you can use one of the following steps:

Double-click the icon of the device in the Other Devices area in the network environment.

Alternatively, you can also enter the IP address of the device in your browser.
5.4

Factory reset

Following the factory reset, the device behaves as in the state of delivery. The device uses DHCP, the
Modbus TCP/IP port is 502 and no additional data points and modules are configured.
5.4.1

Factory reset using the factory reset button on the device

The device can be reset to the factory settings through a sequence during start-up.

Make sure that the device is switched off.

Press and hold button (1) and switch on the device.

Press and hold button (1) until the LED (3), the APP LED (4) and the COM LED (5) flash slowly
simultaneously.

Briefly release the button (1), then press and hold it again until the LED (3), the APP LED (4)
and the COM LED (5) flash quickly simultaneously.

The factory reset is being carried out; release button (1).

The device need not be restarted following a factory reset.
The factory reset can be cancelled at any time by interrupting the sequence.
5.4.2

Factory reset using the website of the device

The factory reset can also be triggered from the website of the device.

Call up the website of the device (see chapter 5.3 "Accessing the website of the device").

Select Factory Reset in the upper menu bar on the website.

Confirm the factory reset when the security prompt appears.

The next displayed page, Factory Reset, indicates that the factory reset is being carried out. As
soon as this is complete, the start page is loaded again.
Order No. S-0002-007
ise smart connect Modbus Vaillant
Commissioning
Product Manual Page 29 (45)