Configuration Step 3 - Configuration Of The Modbus Tcp/Ip Port - ISE smart connect Modbus Vaillant Product Manual

ise smart connect Modbus Vaillant
Configuration
Configuration step 3 – Configuration of the Modbus TCP/IP port
3.3
If needed, you can change the Modbus TCP/IP port of the device on the website. You can find this op-
tion on the Vaillant components subpage. By default, the port is 502. It is possible to configure a port in
the range between 2,000 and 4,000.
After changing the port, press Save and confirm the reboot of the device. When the website is accessi-
ble again, the device uses the newly configured Modbus TCP/IP port.
Order No. S-0002-007 Product Manual Page 15 (45)