C12 Controller Minimum Voltage Adjustment Setting - KUNTENG KT-LCD8H User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
Meter uses LCD3 new version of communication protocol, it is compatible
0
Meter uses LCD1 and LCD2 old version communication protocol, it is not
1
As data source for copying parameters, the meter transfers the new LCD3
2
C11 selects 2, hold
environment, and then the meter is served as data source for copying parameter (see
parameter copy), there's source logo on display interface.
After finishing C11 parameter setting, hold
current set values and enter C12 parameter setting interface.
○

C12 Controller Minimum Voltage Adjustment Setting

Enter C12 parameter setting interface after C11 parameter setting is finished, C12
parameter column flashes.
LCD1 and LCD2.
compatible LCD3.
parameter to other meters.
(SW) long for about 2 seconds to exit the setting
Data Source Display Interface
- 33 -
button (SW) shortly to save the